Hydro Jetting in Dallas-Fort Worth, TX

Hydro jetting uses high-pressure water, typically 3,000 to 4,000 PSI, to scour the full interior circumference of a pipe. A mechanical snake punches a hole through a blockage but leaves most of the buildup on the pipe walls. Jetting removes the material from the walls entirely, restoring the pipe to near-original capacity. For recurring problems like grease accumulation or root intrusion, jetting provides a much longer-lasting result because it addresses the buildup rather than just the immediate blockage.

Our equipment is configured for pipes ranging from 2 inches to 36 inches in diameter. We select the nozzle type, hose size, and water pressure based on the specific pipe diameter and material. Smaller lines like 4-inch sewer laterals and large storm drains up to 36 inches each require different setups, and we carry the full range of tooling to handle anything in that span.

When performed correctly with proper pressure settings, hydro jetting is safe for pipes in sound structural condition. The risk comes from jetting pipes that are already compromised, such as cracked clay pipe, corroded cast iron, or lines with existing joint failures. That is why we recommend a camera inspection before jetting whenever the pipe condition is unknown. If pre-inspection reveals structural problems, we will discuss the findings with you before proceeding.

The expansive clay and Blackland Prairie soils throughout Dallas-Fort Worth expand and contract dramatically with moisture changes. This ground movement shifts pipe joints apart over time, creating gaps where tree roots infiltrate the line and soil washes into the pipe. The result is recurring blockages that mechanical cleaning alone cannot keep up with. Hydro jetting cuts the roots and flushes the intruding material, and when combined with regular maintenance, it keeps these lines functional between more permanent repairs.

It depends on the type of operation. Restaurants and food service facilities with high grease output typically need quarterly jetting to stay ahead of buildup and remain in compliance with local FOG (fats, oils, and grease) regulations. Commercial properties without heavy grease production can often go 12 to 24 months between jetting services. We can recommend a schedule based on the CCTV inspection results from the initial cleaning.

Yes. We offer CCTV inspection as both a pre-jetting assessment and a post-jetting verification step. Pre-inspection confirms the pipe is structurally sound and identifies the type of blockage so we can select the right nozzle and pressure. Post-cleaning camera work documents the results and gives you a visual record of the pipe condition after jetting. Many municipal and commercial clients require this documentation for their maintenance records.

Hydro jetting is very effective at cutting and flushing tree roots from sewer and storm drain pipes. Specialized root-cutting nozzles use concentrated water jets to sever roots at the pipe wall. However, jetting removes the roots that have entered the pipe; it does not seal the joint where the roots got in. If root intrusion is a recurring issue, we will recommend inspection to determine whether a permanent fix like pipe lining or joint sealing is warranted.

The main thing we need is access to the pipe system, which typically means clear access to cleanouts, manholes, or other entry points. If the work involves sewer laterals on a commercial property, make sure we can reach the cleanout locations without obstruction. For municipal or roadway work, coordinate any required lane closures or traffic control ahead of time. We will confirm all access requirements with you during scheduling so there are no delays on the day of service.